PUMPMAN WPS Submersible Sewage Pump, 2" NPT Discharge, Max 4830 GPH, Max 44FT Head, Automatic Float Switch Dirty Water Pump for Basement, Septic Tank, Farm Sewage Drainage
PUMPMAN WPS Submersible Sewage Pump, 2″ NPT Discharge, Max 4830 GPH, Max 44FT Head, Automatic Float Switch Dirty Water Pump for Basement, Septic Tank, Farm Sewage Drainage

$199.00

Select options This product has multiple variants. The options may be chosen on the product page

PUMPMAN WPS Submersible Sewage Pump, 2″ NPT Discharge, Max 4830 GPH, Max 44FT Head, Automatic Float Switch Dirty Water Pump for Basement, Septic Tank, Farm Sewage Drainage

by Pumpman

SKU: WPS Series Category: Tag:

$199.00

You might also need
PumpMan SWI Series Submersible Sump Pump (1-1/2" NPT outlet, cast iron submersible sewage pump with float switch for basement, septic and dirty water drainage)
$199.00
PumpMan SWI Series Submersible Sump Pump (1-1/2" NPT outlet, cast iron submersible sewage pump with float switch for basement, septic and dirty water drainage)
PumpMan MR Series Domestic DC Brushless Silent Booster Pump (1/2"& 3/4" NPT, 24V automatic household water pressure booster pump)
$199.00
PumpMan MR Series Domestic DC Brushless Silent Booster Pump (1/2"& 3/4" NPT, 24V automatic household water pressure booster pump)
PumpMan GRS40-5F Flanged Circulator Pump (115V/60Hz, seal-free high flow hot water circulating pump for large HVAC & floor heating systems)
PumpMan GRS40-5F Flanged Circulator Pump (115V/60Hz, seal-free high flow hot water circulating pump for large HVAC & floor heating systems)
PumpMan Solar Self-Priming Jet Pump, 1 Inch Outlet, Stainless Steel Impeller, DC Surface Solar Water Pump for Household & Small Farm Irrigation
$199.00
PumpMan Solar Self-Priming Jet Pump, 1 Inch Outlet, Stainless Steel Impeller, DC Surface Solar Water Pump for Household & Small Farm Irrigation
📦
Easy Installation
Check out our blog to learn how to install it easily.
Get a Lower Price More Than 5 Products! ▼

PERFORMANCE RANGE

  • Flow rate up to 4830GPH
  • Head up to 44ft

WORKING CONDITIONS

Install and use 25cm from the bottom of the pool

Avoid inhaling hard objects such as stones and screws

After replacing the cutting device, pay attenlion to

the control between the impeler and the cuting disc

as early as 0.1-0.25mm

When there is too little fluidity and too much slurry,

it must be used after adding water

ADVANTAGES & FEATURES

Iron casting are fully electrophoretic

The welded shaft and bolt are made of stainless

steel and are corrosion resistant

The high-speed stamped stator and rotor can

improve the efficiency of the motor

1. High-Capacity Wastewater Lifting & Auto Level Control

This PUMPMAN WPS submersible sewage pump provides a maximum head of 44FT and peak flow capacity up to 4830GPH. It works reliably at a submersion depth of 0.5m to 5m. Equipped with an integrated float switch, the unit autonomously cycles on and off responding to water levels, removing the need for manual monitoring. Its optimized hydraulic channel allows efficient passage of small solid particles, greatly boosting the efficiency of sewage evacuation in sump pits.

2. Broad Working Medium Adaptability

The conveyed liquid temperature is limited to ≤+40℃. The pump operates steadily within a pH range of 6.5~8.5 and a maximum medium density of 1.2×10³ kg/m³. Engineered for dirty water applications, it handles domestic wastewater and lightly contaminated agricultural water. It can tolerate fine suspended solids, making it well suited for routine sewage lifting in residential and farm environments.

3. Electrophoretic Cast Iron Build for Long Service Life

The pump body is constructed from electrophoretic coated cast iron, delivering excellent impact resistance and outstanding anti-rust performance under long-term submerged conditions. All welded shafts and fasteners are made of stainless steel to withstand corrosion from sewage. The high-speed stamped stator and rotor set cuts internal motor power loss, lifting overall energy efficiency during continuous sewage pumping cycles.

4. Versatile Dirty Water Discharge for Civil & Agricultural Use

Perfect for basement sump pit wastewater removal and flood control, it safeguards properties against sewage backflow damage. It is also widely used for septic tank pumping, livestock farm wastewater discharge, construction muddy water transfer and outdoor rainwater sump drainage. It maintains stable running performance in damp, messy field conditions with mixed dirty water.

5. Practical Structure & Easy On-site Setup

Fitted with a 2″ NPT discharge port that matches standard North American piping for straightforward connection. The special bottom suction design prevents large stones and rigid foreign objects from entering the pump cavity to avoid jamming. The compact submersible footprint saves space inside sewage pits. It features simple installation steps and convenient inspection, lowering the workload of regular maintenance.

PERFORMANCE CURVE

PERFORMANCE CURVE

PERFORMANCE PARAMETERS

PACKING INFORMATION

DIMENSION

MATERIALS AND COMPONENTS

Reviews

There are no reviews yet.

Be the first to review “PUMPMAN WPS Submersible Sewage Pump, 2″ NPT Discharge, Max 4830 GPH, Max 44FT Head, Automatic Float Switch Dirty Water Pump for Basement, Septic Tank, Farm Sewage Drainage”

Your email address will not be published. Required fields are marked *

EXAMPLES OF INSTALLATION

Pumpman sump pumps are automatic pumps with float switch used to remove ground water from sump pits. Sump pump can protect your basement from seepage and pump out water that collects where it should not be.

You Recently Viewed

Clear recently viewed