PERFORMANCE RANGE
- Flow rate up to 4830GPH
- Head up to 44ft
WORKING CONDITIONS
Install and use 25cm from the bottom of the pool
Avoid inhaling hard objects such as stones and screws
After replacing the cutting device, pay attenlion to
the control between the impeler and the cuting disc
as early as 0.1-0.25mm
When there is too little fluidity and too much slurry,
it must be used after adding water
ADVANTAGES & FEATURES
Iron casting are fully electrophoretic
The welded shaft and bolt are made of stainless
steel and are corrosion resistant
The high-speed stamped stator and rotor can
improve the efficiency of the motor
1. High-Capacity Wastewater Lifting & Auto Level Control
This PUMPMAN WPS submersible sewage pump provides a maximum head of 44FT and peak flow capacity up to 4830GPH. It works reliably at a submersion depth of 0.5m to 5m. Equipped with an integrated float switch, the unit autonomously cycles on and off responding to water levels, removing the need for manual monitoring. Its optimized hydraulic channel allows efficient passage of small solid particles, greatly boosting the efficiency of sewage evacuation in sump pits.
2. Broad Working Medium Adaptability
The conveyed liquid temperature is limited to ≤+40℃. The pump operates steadily within a pH range of 6.5~8.5 and a maximum medium density of 1.2×10³ kg/m³. Engineered for dirty water applications, it handles domestic wastewater and lightly contaminated agricultural water. It can tolerate fine suspended solids, making it well suited for routine sewage lifting in residential and farm environments.
3. Electrophoretic Cast Iron Build for Long Service Life
The pump body is constructed from electrophoretic coated cast iron, delivering excellent impact resistance and outstanding anti-rust performance under long-term submerged conditions. All welded shafts and fasteners are made of stainless steel to withstand corrosion from sewage. The high-speed stamped stator and rotor set cuts internal motor power loss, lifting overall energy efficiency during continuous sewage pumping cycles.
4. Versatile Dirty Water Discharge for Civil & Agricultural Use
Perfect for basement sump pit wastewater removal and flood control, it safeguards properties against sewage backflow damage. It is also widely used for septic tank pumping, livestock farm wastewater discharge, construction muddy water transfer and outdoor rainwater sump drainage. It maintains stable running performance in damp, messy field conditions with mixed dirty water.
5. Practical Structure & Easy On-site Setup
Fitted with a 2″ NPT discharge port that matches standard North American piping for straightforward connection. The special bottom suction design prevents large stones and rigid foreign objects from entering the pump cavity to avoid jamming. The compact submersible footprint saves space inside sewage pits. It features simple installation steps and convenient inspection, lowering the workload of regular maintenance.
PERFORMANCE CURVE

PERFORMANCE PARAMETERS

PACKING INFORMATION

DIMENSION

MATERIALS AND COMPONENTS

![]()
EXAMPLES OF INSTALLATION

Pumpman sump pumps are automatic pumps with float switch used to remove ground water from sump pits. Sump pump can protect your basement from seepage and pump out water that collects where it should not be.









Reviews
There are no reviews yet.