PumpMan JET Series Shallow Well Jet Pump (1-inch NPT outlet, cast iron self-priming shallow well jet pump)
PumpMan JET Series Shallow Well Jet Pump (1-inch NPT outlet, cast iron self-priming shallow well jet pump)

$199.00

Add to cart

PumpMan JET Series Shallow Well Jet Pump (1-inch NPT outlet, cast iron self-priming shallow well jet pump)

by Pumpman

$199.00

HP 1
MAX GPH 1200
MAX HEAD 180
Voltage 115V/60Hz
You might also need
PumpMan MR Series Domestic DC Brushless Silent Booster Pump (1/2"& 3/4" NPT, 24V automatic household water pressure booster pump)
$199.00
PumpMan MR Series Domestic DC Brushless Silent Booster Pump (1/2"& 3/4" NPT, 24V automatic household water pressure booster pump)
PumpMan SWO Series Submersible Sewage Pump (1-1/2" NPT outlet, cast iron submersible pump for residential septic tank and sewage pit drainage)
$199.00
PumpMan SWO Series Submersible Sewage Pump (1-1/2" NPT outlet, cast iron submersible pump for residential septic tank and sewage pit drainage)
PUMPMAN WPS Submersible Sewage Pump, 2" NPT Discharge, Max 4830 GPH, Max 44FT Head, Automatic Float Switch Dirty Water Pump for Basement, Septic Tank, Farm Sewage Drainage
$199.00
PUMPMAN WPS Submersible Sewage Pump, 2" NPT Discharge, Max 4830 GPH, Max 44FT Head, Automatic Float Switch Dirty Water Pump for Basement, Septic Tank, Farm Sewage Drainage
PumpMan DSP Series Submersible Sump Pump (1-1/2"& 2" NPT outlet, cast iron submersible pump for basement sump pit and yard flood drainage)
$199.00
PumpMan DSP Series Submersible Sump Pump (1-1/2"& 2" NPT outlet, cast iron submersible pump for basement sump pit and yard flood drainage)
📦
Easy Installation
Check out our blog to learn how to install it easily.
Get a Lower Price More Than 5 Products! ▼

PERFORMANCE RANGE

  • Flow rate up to 1200 GPH
  • Head up to 180ft

WORKING CONDITIONS

  • Ambient temperature is 0℃~+45℃
  • The medium temperature does not exceed +40℃
  • The PH of the medium is between 6.5-8.5
  • The volume ratio of solid impurities is not more than 0.1% and the particle size is not more than 0.2mm

ADVANTAGES & FEATURES

  • Durable cast iron volute
  • Built-in automatic thermal overload protector Pressure switch is pre-set at 30-50 PSI for automatic operation
  • Dual voltage (115V)motor, factory set for 115V
  • For use on shallow well applications where wells are 25ft (7.6m) deep or less
  • 1-1/4″NPT suction with 1″NPT discharge

1. Powerful Shallow Well Water Intake Performance

PUMPMAN JET shallow well jet pumps reach a maximum head of 180 FT with flow capacity up to 1200 GPH. Specially engineered for shallow wells with depth no more than 25 feet, this pump features excellent self-priming capability to extract underground water steadily and deliver consistent domestic water supply for households.

2. Reliable Medium Compatibility

It supports conveyed medium temperature ≤40℃, working pH value from 6.5 to 8.5, and solid impurity volume ratio within 0.1% with maximum allowable fine particle size of 0.2 mm. The pump works reliably under ambient temperatures ranging from 0℃ to 45℃, perfectly suited for clean water intake applications in residential and light industrial environments.

3. Robust and Durable Pump Construction

Built with heavy-duty cast iron volute, the pump housing delivers outstanding impact and corrosion resistance to extend service life. An integrated automatic thermal overload protector will cut off power once the motor overheats, preventing motor burnout and securing safe long-term continuous operation.

4. Multi-scenario Water Intake Applications

This jet pump is ideal for extracting groundwater from shallow wells and boosting domestic water pressure for residences. It also handles clean water conveyance for small industrial uses. It serves as a preferred water intake solution for rural private houses and small farms.

5. Plug & Play Automatic Control

Equipped with a pressure switch pre-set at 30–50 PSI to enable automatic start and stop controlled by water pressure. The dual-voltage motor is factory configured for 115V operation. It adopts a 1-1/4″ NPT suction port and a 1″ NPT discharge port for firm threaded connections, simplifying pipeline hookup, installation and commissioning work.

PERFORMANCE CURVE

PERFORMANCE CURVE

PERFORMANCE PARAMETERS

PACKING INFORMATION

DIMENSION

MATERIALS AND COMPONENTS

Reviews

There are no reviews yet.

Be the first to review “PumpMan JET Series Shallow Well Jet Pump (1-inch NPT outlet, cast iron self-priming shallow well jet pump)”

Your email address will not be published. Required fields are marked *